Ski & Snowboard Boot Fitting

Experience Greater Comfort While Skiing and Snowboarding This Season! Our J-Bar Foam Padding Inserts Help To Reduce Heel Lift & Ankle Blisters! Do your narrow ankles cause heel lift while you ski or snowboard? Maybe it's even resulting in hurtful ankle blisters? If so, our J-Bar ski boot pads can help! Each boot insert will help to reduce the extra volume in your boot liners, allowing you to ski & snowboard with greater comfort this season! Sometimes called "L-Pads," these are a great way to make your boots more snug so you can spend more time on the slopes (and less time healing). General Installation Guidelines:Installation is quick & easy. Follow these guidelines to easily apply each pad & have a more enjoyable day skiing! Apply the pads behind the protruding ankle bones on your boot liners Use the self-adhesive backing to stick each pad to the liner If you have lots of extra space (more heel lift), stack two pads on top of each other If necessary, cover each pad with duct tape for added security. HERE ARE A FEW MORE BENEFITS AND FEATURES!!USA MADEOur ski boot pads are proudly made in the USA! We love our country and we are proud to offer this quality product! SOLD IN SETS OF 4 PADSEach pack comes with 4 pads, which is enough for a pair of boots; If you plan to stack the pads be sure to order two sets (8 total pads)! MADE FROM FIRM 1/8" FIRM NEOPRENEEach padded cushion is made from a firm neoprene foam. The firm material makes it easier to taper the edges of the padding inserts if necessary! SELF-ADHESIVE STICKY BACKINGEach pad comes with self-adhesive backing. To remove the backing, pull down on black foam first, and then pull up on the adhesive backing after it begins to separate.ADDITIONAL PRODUCT FEATURES Ski & Snowboard In Comfort - Each J Bar (or L Bar) boot insert accessories help you ski & snowboard with greater comfort; The bars help people with narrow ankles experience less lift in their heels, reduce ankle blister potential, and ensure a more snug boot fitting Made From 1/8" Firm Neoprene - Each padded cushion is made from a firm neoprene foam; The firm material makes it easier to taper the edges of the padding inserts; For extra filler, you can stack two bars on top of each other to make a thicker pad Self-Adhesive Sticky Backing - Each pad is made with a self-adhesive sticky backing; To apply the bar simply remove the backing and apply the sticky side to your boot liners Sold As Pack of 4 - Each pack is Made in the USA and comes with 4 pads, which is enough for a pair of boots Installation Instructions - For best use, apply the pads behind the protruding ankle bones on your boot liners; Use the self-adhesive backing to stick each pad to the liner; If necessary, cover each pad with duct tape for added security

Get Rid of That Stubborn Shin Bang & Be Comfortable During Your Next Ski Outing!Make your next ski or snowboard outing more enjoyable with these foam ski shin pad guards (sold in pairs)! When used properly, these ski and snowboard shin pad inserts serve as a protector that helps to guard against shin-bang (sometimes called "shin burn" or "shin bite"). Either use the adhesive backing to stick them where you need relief, or wedge them into position without using the adhesive. They are perfect for downhill or cross country skiers, but are also great for skates (ice and roller), work-boots, and any situation where your shins or feet get irritation from boot & shoe rubbing! Each Pad Can Be Cut to Fit Your Needs & Used for Other Areas of the Body!These pads are most commonly used to prevent irritation from the boot that causes shin burn or shin bang. However, these pads can also be cut in order to be used for other areas of the foot to prevent irritation as well. Because these can be cut to fit, you can customize them with scissors to help protect your ankle, heel, etc. For example, if you need something more similar to a "J-Bar" you can cut these accordingly. Here Are A Few More Things You Should Know:USA MADEEach shin pad pack is proudly made in the USA! We love our country and we are proud to help you protect your shins with these pads! SHIN PAD DIMENSIONSEach pad is 1/4" thick and has dimensions of 6 x 3 inches. Some users have been known to stack pads on top of each other for increased thickness. WORKS FOR MULTIPLE "BOOT-TYPES"While often used as ski boot pads for snowboarding & skiing boot fitting, they also can work as inserts for work boots, shoes, ice skating, hockey skates, roller blades, and even shoes! ADHESIVE BACKING REMOVALEach pad comes with self-adhesive backing (using this is optional). To remove the backing, pull down on black foam first, and then pull up on the adhesive backing after it begins to separate. Additional Product Features ELIMINATE SHIN BANG - When used properly, these ski and snowboard shin guards serve as a protector that helps to guard against shin-bang (sometimes called " shin burn " or " shin bite "); Perfect for downhill or cross country skiers MINIMIZE BOOT IRRITATION - Shin guard pads will help make your next outing more enjoyable by helping prevent irritation from your boots; Either use the adhesive backing to stick them where you need relief, or wedge them into position without using the adhesive USE FOR OTHER AREAS - These pads can also be used for other areas of your foot to prevent boot irritation; Because these can be cut to fit, you can customize them with a scissors to help protect your ankle, heel, etc MULTI-PURPOSE PADS - These pads are also great for skates (ice and roller), hockey, work boots, or any situation where your shins and feet get irritation from boot or shoe rubbing; Each pad is 1/4" thick and has dimensions of 6 x 3 inches

Get Pain Relief No Matter What Type of Boot You are Wearing! Whether You Ski, Skate, or Wear Regular Boots These Pads Can Help! Get relief from pain and discomfort! Our Covey Sports Ski & Snowboard cushioned foot and ankle pad provides relief for a variety of circumstances and activities. The padding is typically placed around the ankle knobs but is good for other areas of the body as well (heels, feet, etc). Each pad can be cut to fit with scissors to fill the valleys and create focal compression when snuggly wrapped with socks or ankle wrap. Get Relief From Blister Pain By Using the Donut Hole to Protect Blistered Areas! When properly placed, each foam donut will act as a protector where a blister has developed. To protect a blistered area, simply position the donut hole over the affected area. Next, use the adhesive backing to stick them where you need relief, or wedge them into position without using the adhesive. Here Are A Few More Things You Should Know About Each Pad: MADE IN USA Each donut pad pack is proudly made in the USA! We love our country and we are proud to help you protect your feet with our ankle donut pads! DONUT DIMENSIONS Each donut pad cushion is 1/4" thick. The pad itself is 3 1/4" in diameter with the middle "cut-out" area measuring approximately 1 3/4" diameter. Some users have been known to stack pads on top of each other for increased thickness. ADHESIVE BACKING REMOVAL Each pad comes with self-adhesive backing (using this is optional). To remove the backing, pull down on black foam first, and then pull up on the adhesive backing after it begins to separate. WORKS FOR MULTIPLE "BOOT-TYPES" While often used as ski boot pads for snowboard & ski boot fitting, they also work great as inserts for work boots, shoes, ice skating, hockey skates, roller blades, and even shoes!Additional Product Features FOAM ANKLE PADS FOR PAIN RELIEF - Each cushioned foot and ankle pad provides relief for a variety of circumstances and activities; While often used as ski boot pads for snowboard & ski boot fitting, they also work as inserts for work boots, shoes, ice skating, hockey skates, and roller blades MULTI-PURPOSE FOAM DONUTS - Padding is typically placed around the ankle knobs but is good for other areas of the body as well (heels, feet, etc); Pads can be cut to fit with a scissors to fill the valleys and create focal compression when snuggly wrapped with socks or ankle wrap ANKLE PROTECTORS FOR BLISTERS - When properly placed, each foam donut will act as a protector where a blister has developed; Simply position the donut hole over the affected area and use the adhesive backing to stick them where you need relief, or wedge them into position without the adhesive THICKNESS AND DIMENSIONS - Each donut pad cushion is 1/4" thick; The pad itself is 3 1/4" in diameter with the middle "cut-out" area measuring approximately 1 3/4" diameter; Pads can also be stacked on top of each other for increased thickness ADHESIVE BACKING NOTE - Each pad comes with self-adhesive backing (use is optional); To remove the backing, pull down on black foam first, and then pull up on the adhesive backing after it begins to separate; Simply adhere the backing to your boot or socks

Experience Less Heel Lift, Ankle Soreness & Blisters This Ski Season!Our wrap-around ankle pads are here to help alleviate ankle pressure while skiing & snowboarding! With these foam boot fitting pads, you will experience less to no extra heel lift or discomfort from too much space in your ankle boot liner area. Each pad serves as a filler to reduce the extra space in the heels and ankle bone area to ensure a more snug (& comfortable) boot fitting!Basic Boot Liner Installations Instructions:Installing your ankle wrap pads just takes a few minutes. Here are some basic instructions to help: First, remove your boot liners when they are dry. Second, slide your foot into the liner. Third, mark your ankle bones' position with a pen or pencil on the outside of the liner. Fourth, remove your foot & apply the pads to the liner so that the "C" of the pads surrounds your ankle bone location. If necessary: Apply duct tape over the pads for extra security. HERE ARE A FEW MORE HIGHLIGHTS OF OUR ANKLE WRAP PADS!!MADE IN THE USA All of our ski boot fitting products are made in the USA. We love our country & are proud to offer these boot-fitting pads!AVAILABLE IN TWO SIZESThese pads come in two sizes. The Small size is 8" x 4.5" and is suitable for smaller ankles. Meanwhile, the Large size is 9.5" x 6" and is suitable for larger ankle sizes!MADE OF FIRM 1/8" FIRM NEOPRENEEach padded cushion is made from a firm neoprene foam. The firm material makes it easier to taper the edges of the pads if necessary.SELF-ADHESIVE STICKY BACKINGEach pad is made with a self-adhesive sticky backing, helping to ensure that your pads will stay in place! If you need a thicker pad, you can even stack two pads on top of each other!  Additional Product Features SKI BOOT VOLUME REDUCER - Each wrap-around boot liners insert pad helps you ski & snowboard with greater comfort; Each pad serves as a filler to reduce extra space in the heels and ankle bone area to ensure a more snug boot fitting MADE FROM FIRM 1/8" FIRM NEOPRENE - Each padded cushion is made from a firm neoprene foam; The firm material makes it easier to taper the edges of the padding inserts SELF-ADHESIVE STICKY BACKING - Each pad is made with a self-adhesive sticky backing; To apply the pads simply remove the backing and apply the sticky side to your boot liner SMALL & LARGE SIZES - Small is 8"x4.5" and suitable for smaller ankles; Large is 9.5"x6" and suitable for larger ankle sizes; Covey Sports Ski & Snowboard offers a full line of boot fitting pads to reduce pain and blistering in your ankle, shin, & heel areas while skiing INSTALLATION INSTRUCTIONS - First, remove your boot liners when they are dry; Second, slide your foot into liner; Third, mark your ankle bones position with a pen or pencil on the outside of the liner; Fourth, remove your foot & apply the pads so the "C" of the pads surround your ankle bone location of the liner

Eliminate That Stubborn Heel Lift & Ski With Greater Comfort During Your Next Ski Outing! Our Covey Sports Ski & Snowboard heel wedge padding helps to eliminate bothersome heel and foot lifting while skiing or snowboarding! Each pad insert elevates the heel to help reduce or eliminate heel lift in your ski and snowboard boots. By decreasing discomfort that comes from poor boot-fitting, you will be sure to last longer on the slopes!! Customizable Sizes to Fit Your Needs With Options for Men, Women, & Kids! Each heel lift pad is 3/8" at the thickest end and 5 3/4" long. Small is 2 1/2 inches wide; Medium size is 2 5/8 inches wide; Large is 2 7/8 inches wide. The pads are grindable and can be glued into place for maximum boot comfort, which makes them work for men, women, & kids! Typical placement is inside the boot liner and underneath the insole which will allow your foot to slide farther back in your boots. Here Are a Few Additional Benefits From Using Heel Lift Pads: USA MADE Each ski boot wedge pack is proudly made in the USA! We love our country and we are proud to help you ski in greater comfort with these pads! IMPACT ABSORPTION Heel lift pads help to increase your comfort and absorb the impact of hard landings while skiing or snowboarding. ALLEVIATE BONE & MUSCLE PRESSURE Heel pad inserts also help to alleviate pressure around the foot ankle bone and calf muscles while simultaneously taking the pressure off your toes. IMPROVE YOUR POSTURE Placing heel lift pads in your footbed helps to improve your posture and also serves as a volume reducer in your boot bottom. This helps to improve the angle of your hips, back, and knees when skiing and snowboarding.Additional Product Features ELIMINATE BOTHERSOME HEEL & FOOT LIFTING - Each pad elevates the heel to help reduce or eliminate heal lift in your ski and snowboard boots; While typically used in ski boots, these can also work with snow board boots, as well as other types of skates, shoes, etc MAXIMIZE COMFORT, MINIMIZE PAIN - Pads help to increase comfort and helps to absorb the impact on hard landings while skiing or snowboarding;  Also helps alleviate pressure around the ankle bones and calf muscle, and takes the pressure off your toes IMPROVES YOUR POSTURE - Placing ski boot lifts in your footbed helps to increase your posture and also serves as a volume reducer in your boot bottom; This helps to improve the angle of your hips, back, knees, and legs when skiing and snowboarding CUSTOMIZABLE SKI BOOT FITTING PADS - Pads are grindable and can be glued into place for maximum boot comfort; Typical placement is inside the boot liner and underneath the insole which will allow your foot to slide further back in your boots SIZE DIMENSIONS - Each heel lift pad is 3/8" at the thickest end 5 3/4 inches long; Small is 2 1/2 inches wide; Medium size is 2 5/8 inches wide; Large is 2 7/8 inches wide; Customizable and adjustable nature made these great for men, women, and kids

Get More Life From Your Ski & Snowboard Boots & Tighten Up Your Packed Out Liners!Our Covey Sports Ski & Snowboard insole boot shims are a simple way to increase volume and tighten up your "packed out" liners. Not only will this increase your comfort, but it will prevent you from needing to buy new boot liners as frequently! This will increase comfort, but also save you time and money! Increase Your Boot Comfort. Your Feet Will Thank You!Our boot insole shims are designed to be used under the inner boot liner to fill in excess space for a more comfortable boot footbed. It is recommended to wedge the insert in-between the snow boots shell and liner for proper usage. This will reduce the extra volume in your boot, making for a more comfortable day on the slopes. What's more, the fiber composition provides good insulation for your feet while skiing and snowboarding!! A Few More Reasons You Will Love These Ski Boot Shims!USA MADEOur ski & snowboard boot inserts are proudly made in the USA! We love our country and we are proud to offer these American-made shims that help skiers enjoy their time on the slopes! POLYESTER MATERIALEach insert is very sturdy and is 1/8" in thickness. Because they are made from a non-woven polyester, they are certain to last for long periods of time! DIMENSIONS AND VARIATIONSWe offer a variety of sizes to accommodate most ski boots. LENGTH BY SIZE: Small is 10 Inches, Medium is 10.5 Inches, Large is 11.5 Inches, and X-Large is 12 inches long. TRIMMABLE SHIMSWe recommend for skiers and snowboarders to buy one size up and trim the shims as necessary, as each insert can be cut with a scissors for a custom fit. And because these are trimmable, the size varieties are able to adjust to accommodate most men, women, and kids! Additional Product Features TIGHTENED LINERS: Covey Sports ski and snowboard insole boot shims are a simple way to increase volume and tighten up "packed out" liners; Designed to be used under the inner boot liner to fill in excess space for a more comfortable boot foot bed POLYESTER MATERIAL: Each shim is 1/8 inch in thickness and is made from a non-woven polyester; Each shims fiber composition provides good insulation for each heel and foot while skiing and snowboarding INSERTION TIP: Recommended to wedge the shim in-between the snow boots shell and liner for proper usage; Using these inserts give some protection from needing to purchase a liner replacement as frequently TRIMMABLE SHIMS: Recommended for skiers and snowboarders to buy one size up and trim the shims as necessary; Each insole shim can be cut with a scissors for a custom fit LENGTH BY SIZE: Small is 10 Inches, Medium is 10.5 Inches, Large is 11.5 Inches, and X-Large is 12 inches long; Because these are trimmable, the size varieties are able to adjust to accommodate most men, women, and kids